Audio Authority 1171 Manuel d'utilisateur télécharger pdf (Page 11)

10 Audio Authority Model 1170 User Manual

Audio Authority Model 1170 User Manual 11

Limited Warranty

Should any consumer use product manufactured by Audio Authority fail due to defects in materials or

workmanship within one year from the date of the original sale to the end-user, Audio Authority guarantees

that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by

Audio Authority (Ground service only). A copy of the invoice from an Authorized Reseller showing the item

number and date of purchase (proof-of-purchase) must be submitted with the defective unit to constitute a

valid in-warranty claim.

Units that fail after the warranty period has expired may be returned to the factory for repair at a nominal

charge, if not damaged beyond the point of repair. All freight charges for out-of-warranty returns for repair

are the responsibility of the customer. Units returned for repair must have a Return Authorization Number

assigned by the factory.

This is a limited warranty and is not applicable for products which, in our opinion, have been damaged,

altered, abused, misused, or improperly installed. Audio Authority makes no other warranties either

expressed or implied, including limitation warranties as to merchantability or tness for a particular purpose.

Additionally, there are no allowances or credits available for service work or installation performed in the

eld by the end user.

Using Compatible IR Products

Infrared signals may be transmitted from any

Wallplate location back to the 1171 IR output

by connecting a compatible IR receiver to the

Wallplate’s IR jack. The Wallplate provides

12V power to the IR receiver; do not use IR

receivers that provide their own power or

damage could result.

Connect a compatible emitter to the 1171’s

IR output. Use only passive emitters or dam-

age could result.

Tip = Signal

Sleeve = Ground

WARNING: Use only

passive emitters,

without a powered

connecting block.

Tip = Signal

Ring = Ground

Sleeve = +12 Volts

WARNING: Connect

receivers (12V only) to

Wallplate with no

connecting block or

other power source.

Emitter Pinout

A passive emitter usually

has a two-conductor plug.

Receiver Pinout

Receivers are powered

by 12 volts on the sleeve

contact of the 9878

Wallplate IR jack.

1 2 ... 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Audio Authority 1171 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Audio Authority 1171