Audio Authority ADX-1616 Spécifications télécharger pdf (Page 7)

Installation

The ADX is easy to set up for both simple and advanced installations. Perform the following steps.

Installing the ADX

The ADX is conveniently designed so that it may be installed either on a shelf or in

a standard 19-inch equipment rack. If rack mounting, remove the feet and the cover

screws adjacent to the front panel of the unit. Reuse the cover screws to mount the

Model 1192A rack adapters supplied with the ADX. Be sure to place a spacer under

the adapters at every screw location. Secure the ADX to the rails of the equipment

rack with the screws supplied with the rack adapter kit.

Initial Audio Setup

Independently test each component to be connected to the ADX prior to system assembly. This will greatly reduce

time-consuming troubleshooting measures later. Verify basic ADX functionality by performing the

following steps:

1. Connect one source unit to a pair of input jacks numbered 1-8.

2. Connect one audio receiver to a pair of zone output jacks numbered 1-8.

3. Use high quality cable and keep the lengths as short as possible.

4. Turn on the source, receiver and the ADX for an initial test. Verify the audio pathway is performing acceptably by selecting

the appropriate source input and zone output from the front panel (detailed instructions for Front Panel operation can be

found on page 10). You should now hear the source material being played. If you do not, please refer to the

Troubleshooting section found on page 16. If you are still experiencing difculty, please contact Technical Support by

phone at 859-233-4599 or toll free in the US at 1-800-322-8346.

5. Repeat steps 1-4 with jacks numbered 9-16.

6. If no problems have been noted, remove power and continue installation.

I/O Connections and Testing

• Determine the correct wiring conguration for your setup. It is a good idea to label the RCA cables as to the actual location

they either come from or go to (e.g. Input 1 - Cable Box, Input 2 - Music Server, Zone 1 - Kitchen, Zone - 2 Living Room etc.)

Be sure to use good quality RCA cables for optimal results.

• Connect the ADX power supply; the unit will immediately power on.

• Apply power to all sources and associated equipment. Use the front panel controls to verify audio signal integrity of sources

at each zone location.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Audio Authority ADX-1616 Spécifications Page 7