Audio Authority HLX Series Manuel d'utilisateur Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
Audio Authority HLX Series User Manual 11
Comprehensive IR Control System
The HLX can be used right out of the box; no setup is
necessary. Comprehensive IR controllers can use the
complete HLX IR code set, along with the codes of the
sources. HLX volume controls are not included in this code
1. Patch the IR signal directly to the IR input port on the
rear panel using a standard 3.5mm cable or, place a
stick-on emitter or blaster from the infrared system on
the HLX front panel optical IR receiver.
2. If the HLX IR codes are available from your remote
control company, download and/or activate those les.
3. A HEX le can be downloaded from the Audio Authority
website: www.audioauthority.com/page/software.
Logitech Harmony remote controls can access
the HLX IR codes in the Harmony database here:
Amplier>Audio/Video Switch>Audio Authority>HLX.
Zone IR Control
1. Set up a programmable remote (URC, RTI, Logitech,
etc.) with HLX remote control codes.
2. Connect an IR receiver to the HLX system either by
running the IR receiver cable directly to the input of a
2248 Zone Card, or connect the IR receiver to the zone
receiver IR jack.
3. For operation tips, see the zone IR explanation in the
operation section below.
HLX Front Panel Controls
Front panel control is peformed via touch sensitive keys
and a selector knob.
The default screen is the zone/source switching screen.
Scroll zones using the knob, press the knob to choose a
zone, then scroll and select a source.
To perform multiple switching operations, use GROUP,
FAVORITE and ALL keys (some setup required).
Touch MENU to access settings and scroll to a desired
item and press the knob to enter.
Press the BACK key to exit.
Zone IR Operation
HLX “Buttons” for Remote Control Systems
When programming a remote control system, the following
functions are available for operational controls:
Source Buttons: 12 discrete buttons cause the source
connected to the zone to be switched, given the current
conguration (sources that do not exist or that are
restricted in some way cannot be selected).
Audio/Video Buttons: breakaway switching is possible
by rst pressing the audio or video button and then a
discrete source button; only the audio or video signal is
switched.
Lock Access: remove other zones viewing the source
selected and temporarily restrict other zones from
selecting the source.
Lock Control: temporarily restrict other zones from
passing IR to the selected source device.
Unlock: cancel all temporary restrictions placed by the
activating zone.
Digits: the 0-9 digits on the remote can be used to enter
group or favorite numbers.
Favorites: activates a predetermined combination of
zone/source selections; requires a number to be entered
on the 0-9 digits (1-10) before pressing the favorite
button for activation.
Groups: sets a predetermined list of zones to the
specied source video, audio or both. This command
requires one to press the desired group number, group
button, audio or video modiers, and nally the source
button.
IR Operation Example
Current Conguration:
8 source inputs (1-8)
8 zone outputs (1-8) on a Model 2248 output card
No restrictions in place
IR receiver connected to the HLX zone 1 IR input
Favorite 7 is dened as: “zones 1-8 switch to source 2”
Group 1 contains zones 1-4
Example Sequence of Commands
1. [SOURCE1] – zone 1 is connected to source 1
2. [VIDEO][SOURCE2] – switch zone 1 to view source 2
but remain listening to source 1
3. [LOCK ACCESS] – temporarily restrict zones 2-8 from
viewing source 2, the currently viewed source in zone
1. Breakaway is canceled for zone 1 and zone 1 is
forced to view and listen to source 2, the source that it
was viewing when the restriction was activated.
Operation
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire