Audio Authority HLX Series Manuel d'utilisateur télécharger pdf (Page 7)

Audio Authority HLX Series User Manual 7

Installation

SOURCE 1

DIGITAL AUDIO

ANALOG AUDIO

COMPONENT VIDEO

VIDEO

ZONE IR SIGNALS

TV AUDIO

HOME THEATER

RECEIVER

IR RECEIVER

CAT 5E/6 CABLES

DIGITAL AUDIO

Example System 1

In this 12x24 Dual Cat 5 HLX conguration, the installer

uses the Cat 5 pathway to send IR signals from the zone

to the sources. See page 9 for alternative IR connection

options.

In each video zone the installer can choose to use stereo

audio for TV sound and/or digital audio for surround sound

via a home theater receiver.

9879

CAT 5 RECEIVER

1. Read this entire instruction manual.

2. Conrm that nothing is missing from your shipping carton

(see below).

3. Activate your warranty and receive future update

notications by registering your purchase on our website:

www.audioauthority.com/register.

4. Write the serial number (see product rear panel) inside

the back cover of this manual.

5. Connect associated equipment (sources, TVs, etc.)

6. Connect the HLX to a suitable power outlet and test.

7. Perform desired setup operations via RS-232 or Ethernet

if desired (see Appendix A).

Carton Contents

1. Model 2006 card cage with installed cards

2. Power cord

3. User manual

Other Items Required for Installation

• Audio Authority Cat 5 Zone Receivers

• Cat 5e/6 UTP cable

• Professional Category 5e/6 cable tester*

• Patch cables (Ethernet, RCA, and/or optical)

• Coaxial cable and RCA terminations for zone outputs

• Infrared receivers

Suggested Accessories

• Model 1360 Down-converter: converts component video

to composite or S-Video for legacy TVs.

• Model 1362 Up-converter/scaler: converts composite

or S-video signals to component video for legacy video

sources.

• Model 1366 Video Converter: converts YPbPr to RGBHV

or VGA to YPbPr for incompatible video sources or

projectors and video displays.

* It is strongly recommended to test both factory made and site fabricated cables with a professional tester; balanced line pairing order is

crucial for optimal picture quality. Continuity testing of the cable lines does not insure noise free performance.

Remplacer Uniquement

avec Fuse T 2.5A, 250Vac

Replace Fuse Only with

T 2.5A, 250Vac

100-125V~ 50-60 Hz

IN OUT

CAUTION

Improper use can

cause equipment

damage!

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Audio Authority HLX Series Manuel d'utilisateur Page 7

Commentaires sur ces manuels