Audio Authority ADX-1616 Spécifications télécharger pdf (Page 11)

Dim Button

This button toggles through four predened brightness levels for the VFD and keyboard LED indicators. After a ve minute

period, the VFD will enter a screen saver mode and turn off. The power and button LED’s will remain on at a very low level

to show that the unit is receiving power. Any key press or knob adjustment will cause the system to return the VFD and LED

indicators to the last selected brightness level.

Menu Button > Menu Screen

Press the Menu Button to access the following sub-menus: Volume, Tone and Balance, Equalizer, Serial, Network, Export File,

Import File, and Firmware Version.

Volume

Turn the knob on the zone selection line to choose a zone to adjust, or all zones. Push

the knob to move the cursor to the volume adjustment line. Turn the knob on this line

to adjust the volume of the output zone up or down in real time. Push the knob to

return to the zone selection. In order to leave this screen, press the Back button .

Tone and Balance

Turn the knob on the zone selection line to determine the active zone to adjust. Press the knob to cycle the cursor to the Bass,

Treble, and Balance parameter lines respectively. Turn the knob to adjust the parameter in real time. Bass and Treble levels

can be adjusted from -12dB to +12dB. The Balance level may be adjusted from +80 Left to +80 Right. Press the Back button

to return to the menu.

Equalizer

Turn the knob on the zone selection line to determine the active zone to adjust. Press the knob to cycle the cursor to the Band

and EQ lines respectively. Rotate the knob on the Band selection line to choose one of ten different frequency bands, ranging

from 32Hz to 16kHz. Rotate the knob on the EQ level line to adjust the selected Band from -10dB to +10dB. Press the Back

button to return to the menu.

Serial

Rotate the knob to select either 9600, 19200, or 115200 baud rate (9600 is the default) and press the knob to activate the

setting. The other connectivity parameters are xed to 8 data bits, no parity, 1 stop bit, and no ow control.

Network

Provides the current network settings information.

Warning – adjusting the volume

levels of all zones at once can result

in high volume levels in unexpected

areas and should be done with

caution.

Actual screens from ADX showing Menu selections

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Audio Authority ADX-1616 Spécifications Page 11